Ultima Auditorium Seat Plastic Back Fact Sheet 

Architectural Specifications PDF

Dimensions

 

Features Include:

  • 100% MADE IN THE U.S.A.
  • Ergonomic Design for Comfort and state of the art styling
  • Strength and durability warranted to out perform other seating
  • Traditional and contemporary profiles with a variety of style and
  • color selections
  • Steel or cast standards
  • Quiet, Carefree, Consistent gentle lift seats
  • Contoured cold molded foam seats and backs
  • No-Break Poly armrests
  • Factory employee installers

Options:

  • Upholstered, Laminate, or Solid Oak end panels
  • Solid Wood Armrests
  • Book, Card, Pencil, Cupholders
  • Aisle Lights
  • Number/Letter Plates
  • Tablet Arms

More features:

  • No rust, corrosion and chemical resistant
  • 35" back height with 2" foam
  • Molded no break plastic outer back
  • Gravity torsion spring assisted uplift
  • Chair Sizes: 22", 21"

1. TYPE

 
Preferred Seating designs and manufactures the most attractive and functional auditorium seating on the market today…and at competitive pricing. Now we have it all in the seating industry:  ergonomic design for comfort and state of the art styling; strength and durability warranted to out perform other seating; traditional and contemporary  profiles with a variety of style and color selections.

2. UPHOLSTERED SELF-LIFTING SEAT


Gravity assisted system with lifting seat hinge.  The seat  self lifts automatically to the ¾ - fold position, 100% if preferred, when unoccupied and rotates on two 5/16ths" high strength steel hinge rods.  The seat is a torsion spring gravity assisted operation utilizing a 2 heavy teflon coated 8 gauge torsion spring system for quiet operation.  Our outer protective casing consisting of automotive grade no break super tough nylon never wears out.  The seat is available in 21" (533mm) and 22" (559mm) widths, center armrest to center armrest. Seat will pass a  800 pound static test load at edge of seat.  Seat is formed to fit the contour of the body when in the sitting position. The multiple curves give the spectator long time support.  The waterfall at the front of the cushion reduces pressure points.  The seat bottom and seat-lifting mechanism is totally enclosed by an injection molded polypropylene plastic seat pan. The seat pan is designed to complement the contour of the back with matching colors and texture.

3. UPHOLSTERED BACK


The back is upholstered with an inner panel of no break fiber glass reinforced polypropylene with padding and an injection molded plastic outer panel.  The inner upholstered panel is contoured to fit the shape of the decorative rear panel.
The rear of the back is totally enclosed with an injection molded, high resistant, high impact polypropylene textured plastic shell with multiple curves that ergonomically supports the lumbar region of the back.   The back panel is 29" in length with an overall back height of   35".  35" is the necessary height to give support to the shoulders.   The back goes   4" below the back of seat cushion to protect the pad from any rear damage.  The textured grain reduces denting and is damage and scratch resistant. 

The upholstered inner back panel consists of wood with compound curves for body support,  a polyurethane pad 2" thick and covered with the specified fabric.   The molded pad is securely attached to the inner no break polypropylene panel with glue and stapled all around the perimeter with two decorative tie-back tufts.  The seat is available in 21" (533mm) and 22" (559mm) widths, center armrest to center armrest.

4. STANDARDS Available in steel or cast iron. 

a. Steel standards shall be pedestal design, fabricated of 14 gauge, meg welded tubular steel, 3” by 1” rectangular column.  Standards are fixed to the floor with 2 bolts. 

Armrest is securely adjoined to top of column by threaded steel dovetail bolt attachment.
A formed 10 gauge, ⅛” thick, steel foot shall be welded to the bottom of the rectangular column. 

All end standards have a decorative end panel, fabric covered, plastic laminate, wood or cast iron. 

5.  ARMRESTS

The armrest shall be high impact injection molded polypropylene plastic to compliment the seat design.  Optional wood armrests are available with your choice of stain.

6.  Material Specifications

Plastic:  Plastic shall be high density injection molded linear polypropylene plastic with ultra-violet light inhibitors to reduce fading and no static components..  Plastic has a burn rate of 1" per minute when tested by the Department of Transportation of Motor Vehicle Safety Standard No. 302, ASTM D635. 
Padding: BASF chemical company tested resin-585 grams,  255  isocyanate  foam meets the flammability requirements of California Bulletin #117.  Molded  resilient polyurethane foam padding material.  Foam is flame retardant.

Metal:  Steel 14 gauge and or cast iron.

7  Options:
*  Upholstered, Laminate, or Solid Oak end panels
*  Solid wood armrests
*  Armless intermediate standards
*  Book, Card, Pencil, Cup Holders
*  Drink Cup Holders
*  Aisle Lights
*  Number / Letter plates
*  Higher backs for balcony installations